The incoming 23.65 m2 expanded to 25.05 m2 to the production office, and the space could meet the packaging operation. Die-cutting area: Change to Production Office, Due to the demand of diffusion capacity in the current die-cutting area, There is not enough space, The position needs to be readjusted, Auxiliary silo: The raw and auxiliary material silo is completely transformed into a fire-fighting passage, Set aside an area for transformation in SMT, as shown in Figure 8. Automatic first line: half assembly cable and south extension machine area, inner packaging area is transformed, assembly cable can be changed to automatic second line operation arrangement mode, i.e. Moving and adjusting cable spacing, inner packaging area adjusted to 6 6SMT part area is changed to auxiliary material bin (Figure, area can be used for production; 3.1 The die-cutting area is being expanded, and the number of die-cutting equipment to be applied for in the required area shall be determined, and the position adjustment shall be evaluated again. 3.2 Tuonan Film Sticking Machine suggests that the application should be transferred to ATV Headquarters by Manager Li of ATV Equipment Department. 3.3 The position of SMT's door will be readjusted as shown in the figure. There will be one automatic line and six manual lines, which will be one less manual line than the original arrangement. The length, width and height of fire engines are a decisive factor affecting the traffic capacity of fire lanes. Generally, the length of fire engines is greater than or close to 10m, the height is nearly 4m, and the width is nearly 2.5 m. Article 6.0. 2 of the "Construction Regulations" stipulates that the clear height and width of fire lanes passing through buildings shall not be less than 4m, which is determined according to the external dimensions of various fire vehicles used in China. Considering that the speed of fire engines is generally faster, a certain safety factor should be ensured on the width when passing through buildings to facilitate the fast speed of vehicles.But in that case, Not even considering so many dangers, This performance of '74 spray' is of great use, I remember there were 4 '74 spray' on the position at that time, There are two recruits who operate them. Two veterans, Both veterans were squad leaders, All have the skills of air injection, Facing the big wasp descending from the pavement, The two of them were obviously forced to hurry, Take up the '74 spray' and aim at the position where the big wasp is relatively concentrated in the sky and spray it out. If it weren't for the critical situation at that time, the two squad leaders would definitely not have this kind of "dangerous operation", while the other two recruits watched the veterans take the lead and learned to do so. Although they had not received relevant training and the accuracy of spraying was not as good as that of veterans, they finally sprayed out and did not hurt themselves or other comrades in arms.那场盛大婚礼上，周芷若输掉了一切。泰剧《降服魔女的手段 》 由泰国女星Baifern和泰国男星Tao主演，剧情讲述嚣张跋扈的美丽小魔女身边来了一个帅气逼人温柔体贴的男秘书，小魔女慢慢喜欢上男秘书，ysgou.cc但是这段爱情的背后似乎是一个骗局，最终小魔女是否会被爱情降服呢？商人说着回身望向女子，只是……这溪蒨，我实在舍不得。Then, people will become lazier and lazier, and they will not want to move more and more, even if they used to love sports. And spend more and more time sleeping.
